-
```
Due + DOGS102 HW SPI ok
Due + SSD1325 HW SPI ok
```
Original issue reported on code.google.com by `olikr...@gmail.com` on 29 Jun 2013 at 9:10
-
```
- The 256x64 display will be 248x64 centered
- use the pb8v1 architecture, but implementation of _2x_ is needed
- how to implement GR mode?
solution: Port ssd1325 to the pb8v1 architecture, test …
-
```
In ug_dev_ssd1306_128x64.c, the following code is present.....
static const uint8_t u8g_dev_ssd13xx_sleep_on[] PROGMEM = {
U8G_ESC_ADR(0), /* instruction mode */
U8G_ESC_CS(1), …
-
```
- The 256x64 display will be 248x64 centered
- use the pb8v1 architecture, but implementation of _2x_ is needed
- how to implement GR mode?
solution: Port ssd1325 to the pb8v1 architecture, test …
-
```
What steps will reproduce the problem?
1. use atmega hw-spi
2. have 1-wire bus on PB2
What is the expected output? What do you see instead?
working 1-wire and OLED
At first: I just finished my P…
-
```
In ug_dev_ssd1306_128x64.c, the following code is present.....
static const uint8_t u8g_dev_ssd13xx_sleep_on[] PROGMEM = {
U8G_ESC_ADR(0), /* instruction mode */
U8G_ESC_CS(1), …
-
```
In ug_dev_ssd1306_128x64.c, the following code is present.....
static const uint8_t u8g_dev_ssd13xx_sleep_on[] PROGMEM = {
U8G_ESC_ADR(0), /* instruction mode */
U8G_ESC_CS(1), …
-
```
Around 9 out of 10 times, when starting the display, instead of showing the
image, it just displays 'snow'. the 10th time the display works correctly.
The problem occurs on different displays, b…
-
```
In ug_dev_ssd1306_128x64.c, the following code is present.....
static const uint8_t u8g_dev_ssd13xx_sleep_on[] PROGMEM = {
U8G_ESC_ADR(0), /* instruction mode */
U8G_ESC_CS(1), …
-
```
In ug_dev_ssd1306_128x64.c, the following code is present.....
static const uint8_t u8g_dev_ssd13xx_sleep_on[] PROGMEM = {
U8G_ESC_ADR(0), /* instruction mode */
U8G_ESC_CS(1), …