-
As WPA2 Enterprise is now supported by the SDK it should be added to nodemcu. Issue #366 should be reopened.
-
I got myself [this ESP32 development board](https://www.amazon.de/dp/B071P98VTG/ref=pe_3044161_189395811_TE_dp_1)
and installed the toolchain as described [here](https://esp-idf.readthedocs.io/en/v2.…
-
We are testing PEAP on one of our clients network, the ESP32 is unable to connect to the network. First I was getting TG1WDT reset, after changing the interrupt wdt form 300ms to 5000ms now the ESP is…
-
Unless I'm missing something, this library doesn't allow for joining an enterprise WiFi network such as eduroam, where a username and password are required.
Would be nice feature, as the device c…
-
Hi,
Several severe security bugs have been found in the ESP32/ESP8266 chipset/libraries, which are also present in the arduino SDK. As far as I am aware, ESPHome uses the arduino SDK and is theref…
-
I had freeradius 3.0.19 from entware on my Asus RT-AC68U with 384.13_0 Merlin's firmware.
This firmware contains both openssl - 1.0.2s and 1.1.1c
Entware release:
cat /opt/etc/entware_release
…
-
Hi,
In previous arduino cores, I could connect without problem to wpa2 enterprise radius network, but with last arduino cores fails the connection with same program.
Is the same problem comente…
-
Now, new background mode not work for me, endless scanning. Switching wifi mode to "3" also not work. I have 16 wifi networks in range (urban area), maybe this matter. Code after if (index >= 0) { // …
-
On a Network settings dialog WiFi Connect button for a visible network, that was not saved/connected, does not actually connect. Although the connect progress indicator starts spinning.
Network adm…
-
I'm trying to connect to a mqtt broker with a ca.crt, using PubSubClient and WifiClientSecure, but i always get the -2(connect failed) error code. I've seen people having the same issue, but haven't f…