-
```
Hi all,
I am building the Arduino quadrotor from scratch. So far, the frame, arduino
board and every necessary stuff has been put in place but the plane still tilts
to the sides when I try to f…
-
Hi, it is not clear to me if and when the monitoring system can check the status of the car even when it is turned off.
I am interested in seeing the battery growth during charging when the car is o…
-
```
Everything works great, No REAL issues to report, Just a request for all
voltage monitoring, the 12v and 5v monitoring would be AWESOME, plus a network
monitor would be GREAT. For example, packe…
-
```
Everything works great, No REAL issues to report, Just a request for all
voltage monitoring, the 12v and 5v monitoring would be AWESOME, plus a network
monitor would be GREAT. For example, packe…
-
```
Everything works great, No REAL issues to report, Just a request for all
voltage monitoring, the 12v and 5v monitoring would be AWESOME, plus a network
monitor would be GREAT. For example, packe…
-
```
Everything works great, No REAL issues to report, Just a request for all
voltage monitoring, the 12v and 5v monitoring would be AWESOME, plus a network
monitor would be GREAT. For example, packe…
-
There are a number of pads with thermals between the power input and the bed output. Specifically: the mosfet source pins, the +12v side of the output connector, all the pins of the power input connec…
-
4chan rev F
manual movement shows that both TPS channels and alive
shitty wall 12v power supply
auto-calibrate fails
![image](https://user-images.githubusercontent.com/48498823/225726072-451230a…
-
很久没使用了,最近启动后发现一个问题,打印机通电后,LED会正常点亮,然后几秒钟后就灭掉。
查看电路,电源在正常工作,主板亮一个LED灯(工作正常那会儿是亮2个或3个)
怀疑是主板问题,找了主板电路图,用万用表测得电源输入电压24V
![image](https://github.com/NARUTOfzr/Neptune_3_Pro_Plus_Max/assets/22095187/952…
-
Order a motor with reductor.
Areso updated
7 years ago