-
I use the driver MT76x0u first, and I want to enable the power save manually, so I command in Linux: iw dev wlan0 set power_save on. But the return error: -95.
Then where should I enable the IEEE8021…
-
**Raspberry Pi Zero W**
**+ Latest RPi Foundation Kernel**
**+ Latest wireless firmware from this repo**
**= Not working**
I think this is the fatally bad part:
`ieee80211 phy0: brcmf_c_proce…
-
The wifi works well, but after a random time (like some hours) it disconnects and trying to reconnect continuously. Looking into the dmesg output I found this:
> ieee80211 phy0: rt2x00queue_write_tx_…
-
Hey CnLohr
After discovering send_pkt_freedom can no longer send deauth packets / any other mgmt frames, I thought about using your RawSendBuffer (this should work, right?) but I cannot get it to wor…
-
I sent 1000 packets but received more ? my commands are :
sudo echo 0x1c113 | sudo tee /sys/kernel/debug/ieee80211/phy0/iwlwifi/iwldvm/debug/monitor_tx_rate
sudo ./random_packets 1000 100 1 10000…
-
*thelinuxdude:*
I see the same warn when using 802.11s over 5GHz mtk7612. It appears a skb buffer is full?
We have encryption enabled and working. This happens at time, would like to help find a …
-
General instability on mediatek filogic devices with mt7915e have been seen, especially on the WR3000, WAX220 and others.
It has to be noted that some devices work better than others. Heavy wifi mesh…
-
An upgrade from OpenWrt version 19.07.9 to version 22.03.1 by `sysupgrade -v -n --force /tmp/openwrt-22.03.1-ath79-generic-netgear_wndap360-squashfs-sysupgrade.bin` breaks connectivity via ethernet po…
-
*rgrgrg:*
OpenWRT allocates MAC 00:0c:43:4a:21:4e. Two different devices:
''
root@ap01:~# cat /sys/class/ieee80211/phy1/macaddress
00:0c:43:4a:21:4e
root@ap11:~# cat /sys/class/ieee80211/ph…
-
Using 24d9bf85bcad4711294113b447c8c984130849bd
`./configure --disable-linuxmodule --enable-nsclick --enable-wifi && make`
```
../elements/userlevel/fromdevice.hh:258:9: warning: private field '…