-
I have a situation where multiple RTOS tasks are running.
Some of these are waiting on queues for data, eg RSSI, Batt Voltage Date Time to name a few,
These queues then will update icons or display …
-
When the rev.3 hardware is run from battery the remote sometimes (probably) does not initialize the LCD correctly. The result is that the backlight is lit but the screen is blank. The user-led pulses …
-
I have successfully tested the WiFiClock example using the ST7262 driver IC with an 800x480 LCD. Now, I'm attempting to make the same RGB interface work with an SC7283 driver IC and a 480x272 LCD. How…
-
Hi, this address dosn't work.
http://pan.jczn1688.com/directlink/1/ESP32%20module/1.28inch_ESP32-2424S012.zip
And this is unreachable: http://jurca.dyn.ts.si/oscilloscope.html
-
Hello, and thanks for the repository. Going through the code I tried to comment and compile the code without the user interface to understand the most of it.
While all my tests for LovyanGFX worke…
-
How can I use this? I download this repo and should it compile as it is?
-
### This issue...
...relates specifically to the button matrix but was found using the keyboard. When a key is pressed the whole of the `btnm` is invalidated in addition to/instead of, just the regio…
-
display update is so slow for boards with big resolution.
it is caused by LVGL_PIXEL_BUFFER_LINES is limited to 16.
I think it is better to give options such as SPIRAM and lines for drawBuffer.
W…
-
Hello,
Thank you so much for making this code available.
Was following the conversation at: https://forum.lvgl.io/t/lvgl-port-to-be-used-with-epaper-displays/5630
Your work is without doubt t…
-
### Perform all steps below and tick them with [x]
- [x] Check the related part of the [Documentation](https://www.openhasp.com/)
- [x] Update openHASP to the latest version
- [x] Reproduce the iss…