-
I was wondering if you had tried this with the new Restricted API keys Cloudflare has in BETA? Here is an example POST:
curl -i -X POST "https://api.cloudflare.com/client/v4/zones//purge_cache" \
…
-
This seems to be the only way to interact with the author. I greatly appreciate you porting Merlin FW to RT-N18U, and I hope you continue to do it for a while. Do you have an estimated date for port…
-
Hi. Firstly, Loving the software. I'm using it to control my arches both through the App and Xlights.
I'm also using it for my Megatree, and here's where the problem is.
I have 8 x 150node WS2812b…
-
看来我们似乎只落后这一个小小的版本了,不知道我们这个改动大不大,应该主要是gpio的适配等吧?关掉5G?希望能帮上忙,一起慢慢完善这个rtn18u的mod固件.
-
On the dashboard in the Top Client list only the IP addresses are shown and not the names associated with the device.
I tried added the hosts manually to the config to resolve the names however it st…
-
### What version of shadowsocks-libev are you using?
3.2.5
### What operating system are you using?
Linux home 2.6.36.4brcmarm #1 SMP PREEMPT Sat Dec 8 13:25:47 EST 2018 armv7l ASUSWRT-Merlin
…
-
在梅林开启IPv6 Native后，插件显示工作正常，但被墙网站大多不走SS
-
**问题现象**
asus ac1900p 在原版Merlin固件entware环境下无法安装。
**运行环境**
Model | RT-AC1900P
Firmware Version | 384.11_beta2
Firmware Build | Thu May 2 19:59:12 UTC 2019 merlin@b043583
`# uname -a`
`L…
-
如题，on/off指令也似乎无效。不清楚是什么原因
平台：AC88u，改版梅林7.9.1
建议：鉴于目前故障原因未知，妥协方案为增加一个reset选项，连续执行restore和setup。通过指令行或shortcuts一键执行修复。
-
r7000刷了Vortex版384.13能够成功安装及配置，但是发现一个问题就是开机不能自动启动该程序。
都需要通过ssh手动输入ss-merlin start来启动，想问能不能有什么办法直接启动的？