-
Hi Al,
I'm working on digital compass project and I have selected Butterfly STM32L board from here:
[https://www.tindie.com/products/TleraCorp/butterfly-stm32l433-development-board/](url)
the comp…
-
The "/Ac/ActiveIn/Connected" DBus path is not available when a Quattro is connected through VE.Can. So needs to be added.
For now, only the generator start/stop uses it for the "Do not run generato…
-
hello Timo,
Have managed to collect a lot of boards, chips and trying various combinations.
Using a MEGA + NRem canbus shield everything works fine.
Using a teensy 3.2 or 3.5 + MCP2551 again al…
-
Follow instructions to use Teensy 3.2 for Example: NMEA2000/Examples/ TeensyActisenseListenerSender you have to download and add these Libarys (in lets say C:\Program Files\libaries):
- Teensyduino
…
-
Parsing PGN 128267 Water depth with function from NMEA Library as written in display2.ino
PGN is coming from Kave simulator standard settings.
But PGN128267 Water depth is messaging: "Water dept…
-
I have tested ActisenseListener and TemperatureMonitor with Teensy 3.2 board by using Arduino IDE 1.82 and Teensyduino 1.36. For Teensy libraries one has to replace FlexCan code under "C:\Program File…
-
Generic charging source vs. discreet definitions.
Currently there is only one charging source defined, looking much like an AC charger. But there are a whole host of other devices, say Solar, etc..…
-
We say in the spec that Position is in 3D but in all the examples I have seen it is just Lat/Lon....
"values": [
{
"path": "navigation.position",
"value": {
…
sumps updated
7 years ago
-
I know this library was written with Arduino in mind, but I think that with some smaller modifications it could be made platform agnostic. Have a look at my suggestions and let me know what you think.…
-
In NMEA2000 the Date and Time that a Trip Log is reset is transmitted and we have supported this in iKommunicate. It would be good to include this in Signal K so that the data is not lost.
Add two …
sumps updated
7 years ago