-
Hi Boss, since I'm using your wonderfull project as IRremoteESP8266 for my Daiking AC in a little box with battery, I would like to ask you if is possible to implement an MQTT message with the battery…
-
I'm trying to set up the gateway and configure HA for autodiscovery. My setup is an Arduino Mega and a W5100.
I can see packages being published via MQTT but HA produces an error about the message …
-
I flashed the release OpenMQTTGateway v0.9.1 on ESP32 and I am not getting the temperature and from the Clock Mijia model LYWSD02 as in this post:
https://1technophile.blogspot.com/2019/06/integratio…
xenio updated
5 years ago
-
The PCBs in the documentation have different silkscreen markings to the current model as of 2019-04-21.
https://imgur.com/a/FybMk1I
Flashing 0.9.1beta worked as per the instructions, and OTA upd…
-
With the following setup:
Only RF gateways
NODEMCU V1.0
Arduino 1.8.3
Boards ESP8266 2.3.0
OpenMQTTGateway V0.4
Default pinout
ZgatewayRF receives 433Mhz if ZgatewayRF2 is commented
Zgatewa…
-
WT0124 Pool Thermometer (RF 433) traffic is not captured by RF or Pilight modules. When using an SDR running rtl_433 traffic is correctly captured and decoded.
Would like for support to be added f…
ggggh updated
5 years ago
-
I have an RFM69 dev board and some ESP8266 modules (NodeMCU) and I'd like to try write some code to using it with OpenMQTTGateway to receive weather station packets and send onward to HomeAssistant (…
-
Hello,
Thanks for all this work on ESP32, a lot of data for working with this really powerfull chip!
I'm working on presence detection or sensor integration with BLE and our ESP32s (BLE to MQTT …
-
Before submitting a problem please check the troubleshooting section
https://github.com/1technophile/OpenMQTTGateway/wiki/Troubleshooting
**Describe the bug**
A clear and concise description of w…
-
I wanted to bring to your attention following links on this subject:
https://www.youtube.com/watch?v=6NsBN42B80Q
https://github.com/SensorsIot/ESP-Now-Tests/blob/master/EspNow_Slave_ESP8266/EspN…