-
I'm running ver 2.04 of fruitbox on a Pi3 with OS ver 10 (buster) and trying to use a IQaudio DigiAMP+ board for the sound.
Fruitbox works ok when the audio is playing through the HDMI port, but the …
-
Has anyone figured this out yet? I cant open any apps. I was able to open CubicSDR the other day but not now QGRX crashes instantly
ubuntu@ubuntu:~$ sudo CubicSDR
Loaded 262 rig models via hamlib…
-
Hi all,
I'm currently having an issue with the Flick Large + Arduino UNO. I'm using the [Skywriter UNO library](https://github.com/pimoroni/skywriter-hat/tree/master/arduino) for interfacing betwe…
-
## Hardware
* [x] ESP32
* [x] Raspberry Pi
### Version / Git SHA:
Version: 0.7.8
Hallo,
ich habe eine Regelung programmiert, die bei Verbrauchsänderung (gemessen mit Shelly ProEM3) …
-
I have an application where I run a Raspberry Pi Zero with driver HAT for the 10.3" e-paper from Waveshare. The whole thing is powered by a battery. Naturally I want the battery to last as long as pos…
-
## Problem
The `smbus` instantiation logic in `i2c.py` selects the wrong i2c bus number for CM4 Pi.
This presents itself in the form of an uncaught `IOError` that crashes a python script when an…
-
This is a quick write up to get the OLED's working for those who are using Ubuntu Server 22.04.3 LTS as the instructions provided from UCTRONICS are specific to Pi OS.
Note that I've not got the P…
-
Hello
I installed in my Raspberry Pi 4 the latest stable firmware 2022-01-25 and tried to install berryboot after in my 2.5 "HDD/SDD
and it did not work installation finish successful but no boot,al…
-
When trying the PiJuice on Pi 4B using Raspbian Buster out of the box we get a COMMUNICATION ERROR in the PiJuice software although i2cdetect reported the usual addresses (0x14 and 0x68).
Turned ou…
-
I just installed Bullseye on my RPi3 and I cannot get this card/hat to be recognized. I have two, and I have tried them both. I bought both of these a few years ago, but this is my first attempt to ac…