-
hello
request to add the BIGTREETECH SKR PRO V1.1
ARM cortex M4 32 bit
STM32F407ZGT6 MCU
https://github.com/bigtreetech/BIGTREETECH-SKR-PRO-V1.1
merci
-
### Description
Marlin 2.0 Bugfix: when activating ADVANCED_PAUSE_FEATURE and NOZZLE_PARK_FEATURE printer won't heat up heatbed when starting a gcode print. If i order heat bed from the LCD men…
-
Hi all
My SKR mini E3 V1.2 board was working fine with the latest firmware. Suddenly , the ender 3 started to freeze when I start to print from SD card. Previously I didnt have this issue. Every time…
-
### Bug Description
In the SPI.cpp file there are a few redefinition errors being thrown as well as two others errors. This is the second compilation of Marlin I have done. The first was successful…
-
### Description
### Steps to reproduce
1. git clone https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3.git
2. cd BIGTREETECH-SKR-mini-E3/firmware/V1.2/Marlin-2.0.x-SKR-Mini-E3-V1.2
3. …
-
I have configured Marlin 2.0 bugfix for a SKR v1.4 Turbo with TMC 2208 v3.0 drivers. I am running in the parts of a cr-10s 500. I have had success running both z motors with the single tmc stepper an…
-
### Bug Description
After configuring Marlin bugfix 2.0.x for BLTouch M119 reads Triggered before homing z-axis.
[Marlin-bugfix-2.0.x_SKR1_4.zip](https://github.com/MarlinFirmware/Marlin…
-
### Bug Description
I have tried to verify this bug by printing flat circle. It fails.
Instead of printing circle as curve it is being printed as short lines and extruder producing too much noise.
…
-
Got my new BTT SKR mini E3 V1.2 today. Connected it as per the old Creality board and it is dead (no power led).
Have I missed something regarding jumper settings?There is 24V on the input pins and 2…
-
### Description
I downloaded marlin 2.0.x ver. about one week ago.
And I upload it with filament runout sensor function.
I check filament runout sensor will be fine via pronterface.
I send the m…