-
Using .7b1, I flew for .9 hours with no apparent issues (although ADS-B towers kept disappearing and re-appearing). When the flight completed, I simply removed power to the Stratux (as is usually what…
-
I may be the only one experiencing this but let me describe what I am observing and see if someone can tell me what is going on. While sitting static in one location on the ground in view of anywhere …
-
Running 0.5b4. Dual band w/ NooElec Nano 2 NESDRs.
Tried restarting gen_gdl90 using 'service stratux restart' and found that after the restart I was unable to receive any 1090-ES messages. Message c…
-
This worked great on my laptop but when I ran it on the iPhone I noticed the attitude was totally different. It turns out its not using the Stratux device at all. Its using the internal iPhone acceler…
-
I noticed the AHRS is inverted (ground and sky is reversed) when running a simulation on Wingx if the adjusted GPS altitude is 0 or below ground level. Would not normally be a problem unless the adju…
-
The GPS serial port for the RY835AI can be connected via USB or GPIO UART.
Add GPS serial port config to stratux.conf to allow switching between the two ports without recompile of RY835AI.go.
Default …
-
Some users (including me) report random (seemingly) Wi-Fi disconnects. We've been [brainstorming on the reddit](https://www.reddit.com/r/stratux/comments/45bqox/help_catchingreproducing_wifi_disconnec…
-
Are the following messages "normal" with the new power savings mode (when not receiving UAT) ?
The timestamped lines make sense but all of the "failed with -4" are worrisome.
```
2015/12/31 15:58:07…
-
I don’t know if this is a Raspbian or Stratux issue, or if it belongs on Reddit or on Github, so I’ll place it here.
I am attempting to build a second Stratux system and in doing so, I am updating Ra…
-
mpu9150 is being phased out for mpu9250. They are very similar except data resolution. It would be nice to have mpu9250 for the future hw support.