-
Changes to be implemented on initial design:
- [x] I: PI filter on supply input:
1. Place 2.2uF high power Filter inductor
2. Place 0.47uF 50V Filter capacitor
…
-
| CID2 | Description |
| ---- | ----------- |
| 0x45 | Telecontrol command |
| 0x47 | Acquisition of teleregulation information |
| 0x49 | Setting of teleregulation information |
| 0x4F | A…
-
Hi Philipp Hochmann,
Thank you for sharing this project.
I've got a couple of questions, hopefully you have got some time to answer these:
Is this CCT light strip using 2835 chips?
How is …
-
### Is your feature request related to a problem? Please describe.
I have an external Spindle Driver for standard brushed type DC motor I would like to use.
- I need to be able to set M3 using the…
-
Hi, i tried the project.
Did the PCB's at pcbway, and started the project.
I just wanted the classic, potentiometer RGB controller.
First try, put the program with effects on the arduino.
After st…
-
In the PFS-datasheet section 9.2.8 they have this example (when _writing_ with their tool):
 AS TABLE SELECT * FROM read_parquet(list_transform(
generat…
maelp updated
9 months ago
-
Do you have a circuit diagram form the ATTIny/Pi connection?
-
Capturing this discussion from #3:
> As a side note, the power handling increase going from the AO3400A to AON7400A is probably lost due to the SS54 diode on the power input being limited to 5A. Us…
-
Could we implement in CPCIs version of Sinara some power sequencing?
The main advantage would be possibility of enabling peripherals one by one, what should help avoiding sudden current surge. Also…