-
I have several camera traps all using different Pi's and I've noticed on all that when video is set to 1080p the gui can be a bit slower but on the Pi4b it is much slower, for example to scroll throug…
-
**Describe the bug**
I try to overclock the RPi4B above 2500 MHz and it seems to have a lock. Anything higher than 2500 MHz results in a fixed clock at 600 MHz on reboot. The performance of the RPi s…
-
## Hardware
* [x] ESP32
* [x] Raspberry Pi
### Version / Git SHA:
Version: 0.7.8
Hallo,
ich habe eine Regelung programmiert, die bei Verbrauchsänderung (gemessen mit Shelly ProEM3) …
-
Hello, here is my solutions for upgrading the low cost white mmdvm dual hat pcb with failed to init device message:
Both of them need litle solders!
1st solution with a stlink usb adapter:
…
F1RVC updated
8 months ago
-
Based on https://forums.raspberrypi.com/viewtopic.php?p=2158890#p2159063 , I would like to ask for exposing information on the GPCLK feature shortly mentioned in the existing RP1 docs draft, and partl…
-
Now Raspbian GNU/Linux 9 (stretch) 4.19.42-v7+ isn’t playing Direwolf 1.5’s packets in their entirety, only a split second (0.09 seconds according to Audacity) of flat tone, through the RPi 3B+ intern…
-
Lab notes about adding power measurement circuitry in the the latest [power supply](https://github.com/racklet/electronics-prototyping/tree/hat-psu/hat-psu/LMR14050SDDA_reference) board.
Some old n…
-
Hi there,
I'm currently using OpenOCD on a Raspberry Pi to program an STM32L0. I've written a basic Python wrapper around OpenOCD as a quick fix. I'm wondering if there are any examples or documen…
-
I have Jasper setup and mostly working on my RPi3. The problem I'm encountering is that when I start Jasper ($ python jasper.py) it launches and says "How can I be of service, Adam?" I then say "Jas…
-
Nice project. I know this is just an experiment, and without any ill will and not wanting to come across as lecturing here, a couple of notes on the digital aspects:
* Minimum hystersis! That compa…