-
Hello, I have struggle setting up my ssd1327. I successfully managed to use other screens but this one doesn’t seem to work.
I’m starting to think that it’s broken, but when I run an i2c scanner it…
-
Hi Oli, ich hänge seit tagen an diesen SelectionList Code herum und versuche mir einen Menü damit zu kreieren. Es funktioniert alles tadellos bis auf ,das wenn ich einen Menü ausgewählt habe es nicht…
-
The waveshare 1.5 mono OLED mono has an option of 0x3C or 0X3D for an the I2C address. It only works is I do not call u8g2.setI2CAddress() or call u8g2.setI2CAddress(0x78). The address 0x78 is for…
-
Running a Teensy4.0 with an SSD1327 128x128 MIDAS display.
The Teensy gets stuck at u8g2.begin() when booting up off external power until a USB device is connected (even a portable USB charger does…
-
**Describe the bug**
```
/usr/bin/avr-ld: /tmp/arduino_build_795307/libraries/ssd1306/intf/vga/atmega328p/vga96x40.c.o (symbol from plugin): in function `ssd1306_vga_controller_96x40_init_no_output'…
-
### Bug Description
When I compile Marlin for SKR PRO V1.x board and use TEMP_SENSOR_0 set to -5, I can compile without a problem because in .vscode\c_cpp_properties.json file for SKR PRO V1.x boar…
-
**Describe the bug**
I use a Waveshare 128x128 monochrome OLED connected (and jumpered) via I2C at a Arduino Nano (old bootloader). The display works fine when explicitely using the display I2C addre…
-
Hi!
I want to use more than one display on one spi line.
I researched this, and came to the conclusion, that only the cs/ce pin must be different.
So I wired two ssd1351 displays up and connected t…
-
I have 2560 mega Ramp 1.5 / 1.6 .. Anet a8 example configs.
I can compile and upload the 1.1.8 with Ramps 1.4efb motherboard. enabled ~define have tmc2130. Enabled one axis stepper only! NO TMC213…
-
#### Type of Raspberry Pi
Raspberry pi zero W
#### Linux Kernel version
Linux raspberrypi 4.19.42+ #1219
#### Expected behaviour
when running tv_snow.py with a ssd1327 I expect the program …