-
I'm currently using the same PCB for both RFM69 and RFM9x Lora chips.
In the case of the RFM69 the D0 pin is the interrupt line, and therefore is connected to a pull-up resistor.
The other two pins, …
-
Hi,
Did you test v1.2 please? I have two boards (one with rfm95w and another one with rfm68hcw) and both of them have problems. Transceivers are not detected by spi_scan., On both I connected D0 with…
-
Hi
We have a setup using an RFM95 module with a builtin level shifter and an Arduino Uno with the pin mapping below.
```
const lmic_pinmap lmic_pins = {
.nss = 6,
.rxtx = LMIC_…
-
hie there I am trying to build a Lora node to node communication using two mini arduinos and twoFM LORA TRANSCEIVER MODULE, PRE SET TO 868MHZ which has an SX1272 Chip, im having sme errors on my ardui…
-
Arduino: 1.8.2 (Windows 8.1), Board: "Arduino/Genuino Uno"
C:\Program Files (x86)\Arduino\arduino-builder -dump-prefs -logger=machine -hardware C:\Program Files (x86)\Arduino\hardware -tools C:\Pro…
-
I have the lorawan-server( https://github.com/gotthardp/lorawan-server ) on my machine and for some reason the LoRaWanGateway will not negotiate a join with that backend server. I can use the same ar…
-
I would like to upload numbers to the MQTT server with Dragino LoRa shield 1.3 and Arduino Uno.
Now I can only upload string like this wtih Lora-LMIC 1.51 library:
{\"Temperature": 18.00,"Humidity\":…
-
Hi,
Recently started using the library and it has been wonderful so far. Unfortunately I can't make the downlink work properly. I'm running the library on a Raspberry Pi 3 with a Dragino Lora Shiel…
-
Hello !
I am trying to use the lib on Arduino Pro Mini (3.3V 8MHz version), and I have a problem with line https://github.com/matthijskooijman/arduino-lmic/blob/master/src/lmic/radio.c#L691, on the a…
-
Hi, I have setup the server and I'm receiving data via MQTT. When I try to send a downlink packet like this:
`{
"devaddr": "00000001",
"fields": {"led": 1},
"port": 1
}`
I could see it on…