-
When building in Debug configuration, I2C communication is working.
When building in Release configuration, communication gets stuck before it really starts.
This is what the bus looks like at the…
-
Tasmota Version: 5.1.3
Only changes from downloaded Version in user_config.h:
#define WIFI_IP_ADDRESS
#define WIFI_GATEWAY
#define WIFI_DNS
#define STA_SSID1
#define STA_PASS1
#define MQTT_HOST…
-
Hi,
Trying to get our BBB to wakeup from RTC using "mem" and its breaks on wakeup. Now we built a custom kernel, and I wondered if someone could help me deciper the error?
The following error o…
-
Was getting this error:
> [ERROR] [WallTime: 1376891179.350615] Message from device dropped: message larger than buffer.
Per http://wiki.ros.org/rosserial/Overview/Limitations, I thought we had …
-
This would be most useful for Sonoff modules which don't expose many GPIO's.
-
# Task # 02
## Perform a subset of tests on [`iotlab-m3`](https://github.com/RIOT-OS/RIOT/wiki/Board%3A-IoT-LAB-M3) node:
- [ ] bitarithm_timings
- [x] bloom_bytes OK but don't know if the output i…
kYc0o updated
7 years ago
-
I'm experimenting with writing a [driver](https://github.com/serein7/openag_bh1750) for cheap light sensor based on Bh1750 chip . All seams to be working fine and I even see lux reading in [OpenAg UI]…
-
This issue is created to collect all the tasks we need to do before the 3.0.0 Release (Was 2.2.0 but this release contains so much useful features and fixes that it deserves a major version).
### S…
slaff updated
7 years ago
-
Hi,
i tried to install your plugin via `npm install pimatic-bh1750` and it failed to install with the following error:
```
555 verbose cwd /home/pi/pimatic-app
556 error Linux 4.4.11-v7+
557 error ar…
-
Hello Joan,
here I again... ;-)
I try two I2C-Devices on the bus (BME280, BH1750). I expected one Handle for each I2C-device. But i get only one for them (or the same for each...).
If I try only one…