-
I was able to compile and load the latest firmware file from this repo, (red LED flashes then stops, file on card changes from .bin to .cur). However, the LCD screen remained blank and the board is no…
-
I'm trying to copy with VS Code, which always works until now and suddenly impossible to compile, I always get the error that "libmaple / gpio.h" cannot be found ...
![Presse-papier01](https://user…
BelSD updated
4 years ago
-
I have Marlin 2.0bugfix firmware installed on a Raspberry Pi 4 , running Octopi 0.17. When I connect the Mini board to the Pi using a USB cable, the Pi doesn't register "seeing" the connection at all.…
-
Please provide the .STEP files for the two StealthBurner/CW2 modified files in "EBB SB2240_2209 CAN/Custom Printed Parts/"
Specifically, cable_door_EBB_SB.stl and main_body_EBB_SB.stl. I typically…
-
I have two boards that were working but now show blue blank screen on stock Ender 3 LCD screen.
Board one:
Went blank after flashing new firmware. (using firmware.bin from Github), this board seems …
-
### Description
I've just installed the Firmware 2.0.6 for Z homing on the e3 mini of my ender 3 pro and the bed leveling fails running outside of the bed.
Another issue I found is the Z Axis b…
-
bigtreetech is now selling the ramps 1.6 plus with integrated SPI lines for tmc2130.
Please be aware that the SPI lines for the TMC2130 does not work with the Re-Arm board as D40, D42, D65 and D66 …
-
So i have a adafruit neopixel ring around my hotend wich worked well untill i accidently shorted something while cleaning my hotend with a wirebrush, the neopixels went out, eventough the vccout still…
-
I get no communication when trying to connect via raspberry pi3b w/USB cable.
firmware uploads, 3V3 is green, firmware.bin renamed
tried 3 cables, all USB ports
removed, reinstalled klipper (ki…
-
I recently installed the SKR1.4 turbo with the TFT35 E3 touchscreen.
During some prints the LCD display shows the the following error 'Printer halted. Kill() called!' and the print stops.
Ever…