-
My parents got one of these bulbs at Christmas time and I was curious, so I bought some for myself. I already use Espurna on two AiLight compatible bulbs but these Feit bulbs are brighter and have a …
-
**Describe the bug**
vim :terminal is not using high custom colors for bolded colors, as is done for most other terminals (at least: xterm, gnome-terminal, konsole)
This only occurs when "termguic…
-
When i try to execute any command i get the following error:
`fb-adb sh: trouble starting adb stub: WARNING: linker: /data/local/tmp/fb-adb.11dcc27b1fade8b291ff: unused DT entry: type 0x6ffffffe ar…
-
**Describe the bug**
Hallo, leider habe ich ein Problem mit dem sonst gut funktionierenden Adapter. Wenn ich zu viele Datenpunkte in einem zu kurzen Zeitraum ändere, stürzt der Adapter mit dem Fehl…
-
Hi, I was trying to test this out but am having issues compiling the espidf-arduino-blink example. I keep getting the error below. I'm trying the setup on a fresh windows 10 user account.
Source `.…
-
I have a WROVER and an OV7670 camera. I am using the ESP-IDF as of this post date. All compiles cleanly and when I flash/run, the application runs. However, I do not see any output (please see log …
-
I have an ESP32 Devkit C board and a 2.4" TFT Shield with a red board color. The shield has pins on both sides: one side has parallel data and SD pins, and the other side has CS, RST, WR, RD, F_CS, an…
-
RGB NeoPixel LED in hardware-check is not flashing if the crate is upgraded to the latest 0.48.* version. I have commented out the rest of the code but LED flashing and narrowed down the issue to th…
-
`Board: Waveshare ESP32-S3-Touch-LCD-7 with ESP32-S3-WROOM-1-N8R8`
`#define ESP_PANEL_LCD_NAME ST7262`
`#define ESP_PANEL_TOUCH_NAME GT911`
Hi, I have encountered some weird issue…
-
I want to control the WS2812 LED of my [ESP32-C3-Zero](https://www.waveshare.com/esp32-c3-zero.htm) using `esp_idf_hal`'s SPI. I tried this:
```
use anyhow::Result;
use esp_idf_hal::delay::FreeRt…