-
### Problem Description
I'm hoping to get rtlamr working while using [SoapyRemote](https://github.com/pothosware/SoapyRemote) in place of rtl_tcp?
After a cursory glance at the code, the `rtl_tcp`…
-
LimeSDR-USB dont show.
Windows 10, x64
-
For my project, I'm looking at the Yard Stick One as a potential radio. But for my purposes, I need to bypass the firmware's modulation support and deal with raw IQ values, and it seems the YS1/rfcat …
rjzak updated
4 years ago
-
Just wondering if anyone has had any success running this on a Raspberry Pi Zero W?
There is an extra step required to set up docker [here](https://markmcgookin.com/2019/08/04/how-to-install-docker-o…
-
I'm attempting to connect to a remote rtl_sdr dongle running on a SopySDRServer. It works well when using osmocom_fft with these device strings:
"soapy=0,driver=remote,remote=sdr"
"soapy=0,driver=re…
-
cmake (ok)
make ...:
[ 56%] Swig source
/home/gufo/Scrivania/gr-limesdr/swig/limesdr_swig.i:5: Error: Unable to find 'gnuradio.i'
make[2]: *** [swig/CMakeFiles/limesdr_swig_swig_compilation.dir/bu…
-
```
Error: EnvironmentError: OSError: LoadLibrary failed to load "C:\sdr\PothosSDR\lib\uhd\modules\soapySupport.dll"
[INFO::SettingsProxy.py::get_receive_buffer_size] Allocate receive buffer with 26…
-
This is for SoapySDR, but maybe also for RTLSDR and Airspy
For soapy the parameters are : Antenna, clocksource, driverargs
for rtlsdr & airspy they are : biastee
So when starting welle.io with …
-
Thank you for the outstanding decoder flowgraphs and documentation! Best wishes for a 100% successful mission.
Using your test file, I can use a 9k6 capable radio to simulate the satellite for in-…
K4KDR updated
4 years ago
-
Hi,
I just installed this tool on ubuntu 18.04 like wiki proposes and tried to run the spectrum analyzer with e pluto board I have but the urh not detect it and the board is correctly connected and r…