-
Your datasheet on Adafruit's [LED Dotstar 2020 product page](https://www.adafruit.com/product/3341) links to an (older? wrong, since the color profile product change?) datasheet that shows on its fron…
R-OLE updated
6 years ago
-
Machine is a laser cutter drived by a SmoothieBoard.
* when a path has x_min = 0, i.e. it touches an axis, ( cut mode set to cut outside ), the laser cut the mounting material used to set the zero …
-
- [ ] implement OBC switch functionality
- [ ] confirm battery mount footprint dimensions
- [ ] confirm converter layout (with pores)
- [ ] organize datasheets and part numbers for the connectors/c…
-
At times it seems the resistors at least have too much space around them in PCB causing the soldier to run through. Check data sheets for both resistors and capacitors and other components and confirm…
-
Use this issue to track the design of the GW30, which will include wider filters and substantially different layout in Kicad 5.
- [x] Kicad 5 Migration (#99)
- [x] Anaren B0310J50100AHF Balun (#40…
-
- mark connectors with names of LVDS signals
- add front panel LED indicating correct 12V and 3.3V levels.
- R210, R187 = 0R
- add GND and i2C testpoints
- add supply power connector option on the…
-
For some reason I am able to arm/disarm (write to panel) via Homeassistant and Homebridge, but nothing seems to be coming into the `dsc/Get/ZoneX/#` mqtt topics (reading from panel then posting to the…
-
I started testing Allaki board.
So far no smoke detected.
ADC chain works as expected, at least on the scope with generator attached. Gain control also works.
There is a lot of power dissipation …
-
Remarks related to STM32F777NIH6:
* Replace the MCU by an [STM32H750 Value Line ](https://www.st.com/en/microcontrollers/stm32h750-value-line.html?querycriteria=productId=LN2121) they are clearly ch…
-
- [x] 0.47 uF 0603 caps missing
- [x] check photodiode reflow temperature
- [x] check LED reflow temperature