-
```
Use STM32F1xx , with ST virtual com port for USB (serial port) full speed
communication.
the software do not recognize the port.
```
Original issue reported on code.google.com by `michanis...@g…
-
```
Use STM32F1xx , with ST virtual com port for USB (serial port) full speed
communication.
the software do not recognize the port.
```
Original issue reported on code.google.com by `michanis...@g…
-
I'm currently have to use the remote modem with socat command which maps the remote port to virtual local port `socat pty,link=/dev/vmodem0,raw tcp:192.168.5.1:12121` but it is uncomfortable to use. A…
babca updated
5 years ago
-
There is a need to test and validate PSA crypto APIs on platforms (by opposition to development environments or host) especially when PSA crypto APIs rely on platform specific SEs and/or crypto HW acc…
-
I want to have a serial bus that allows for communication between a host board and all of the display boards.
I'm torn between RS-485 and MLVDS
I would want two signals leaving the host board an…
-
currently i am using a replicator 2x with the serial port dev\serial\by-id(some ID here) and the baud rate of 115200 and i selected the makerware driver. For some reason when i go to upload my print…
-
For some reason, I'm not able to exchange data between my esp32 and Twincat. I've tried some modifications. I have used the same SrcAmsAddr port as in the example. Should we use another one? I also cr…
-
There is a lot of confusion/debate found after I've done some research on how to properly receive data with SerialPort in .Net. Because serial ports aren't used as often now, there is a large lack of …
-
I'm using the ESP32's HSPI ports for communication. When I run the example test code, the device isn't found and the JEDEC ID just shows up as zeros.
I know my wiring is correct and all since I am…
-
Surely all of the Garmin Serial-mode communication can be done with a python script instead of GPSBabel? Googling 'garmin serial python' is a good start - a few things to investigate:
https://mygi…