-
I like your power management circuitry, but I noticed that you currently use a 10k/30k resistor divider for measuring the battery voltage, which would drop >100uA with the device turned off... maybe e…
-
u8glib files needed: u8g_clip.c, u8g_com_api.c, u8g_com_arduino_common.c, u8g_com_arduino_sw_spi.c, u8g_delay.c, u8g_dev_st7565_lm6063.c, u8g_font_data.c, u8g_font.c, u8g_line.c, u8g_ll_api.c, u8g_pag…
-
A MicroSD card will be inserted into each T400 during the PCBA process for testing. This will be the SD card that ships with the device. Therefore the enclosure should be capable of being assembled wh…
-
In electronics issue https://github.com/PaxInstruments/t400-electronics/issues/86#issuecomment-66986560 the two 2x3 pin headers will likely be moved to locations such that they can be accessed through…
-
```
What steps will reproduce the problem?
1. Install Google Cast extension on Windows 7 64 bit, Chrome Version
28.0.1500.72 m
What is the expected output? What do you see instead?
What version o…
-
For each thermocouple the LCD should indicate a thermocouple is out of range. Perhaps showing a few dashes.
Depends on https://github.com/PaxInstruments/t400-firmware/issues/7
Related to https://git…
-
In Enclosure version 0.2 (SLA) the SD card slot does not match up with the enclosure. The card slot also interferes with the enclosure.
-
We have moved to a new MicroSd card slot. The model in the enclosure is the old one. The model should also reflect how far the card slot should hang over the edge. See https://github.com/PaxInstrument…
-
```
Looking for support on Intel WIFI Link 5100
I understand iwl5000-series chipsets (including 5100BG, 5100ABG, 5100AGN,
5300AGN and 5350AGN) module will be supported in kernel 2.6.27, by the
intree…
-
In the t400-testing program the button test works for all the buttons except for the power button. It looks like the BUTTON_POWER_PIN is always at 3.2 volts.