-
`../components/usb/hcd.c: In function '_intr_hdlr_chan':
../components/usb/hcd.c:637:14: error: 'USBH_HAL_CHAN_EVENT_SLOT_DONE' undeclared (first use in this function); did you mean 'USBH_HAL_CHAN_EV…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
That question was answered on slack/matrix here: https://matrix.to/#/!pAlHOfxQNPXOgFGTmo:matrix.org/$SDLnmO-F3ALUZKvlnW0TR8SY8nZlbFaR_8C7Hgygoxw?via=matrix.org&via=nitro.chat&via=talk.puri.sm :
> i…
-
Platformio.ini:
```
[env:heltec_wireless_stick]
platform = espressif32@1.9.0
board = heltec_wireless_stick
framework = arduino
upload_port = COM6
monitor_speed = 115200
lib_deps =
ht…
-
After install that drivers keyboard and mouse stopped working. Raspbian is load without errors. I use a Orange PI pc plus(This is the same as raspberry PI). What i need to do?
-
This is a follow-up for things that would be good to support once all the items in #71 are complete.
## Booting from SD Card (or SPI flash)
**[Tracked in #139](https://github.com/tosc-rs/mnemos/…
-
I compiled on FreeBSD 13.0 u-boot with this parameters and have issue in sed: 1: "arch/arm/dts/.rk3288-ev ...": command a expects \ followed by tex
`gmake CROSS_COMPILE=arm-none-eabi- tinker-rk32…
-
### Port
ESP32
### Target chip
ESP32C3
### Hardware Configuration
** Master board: Olimex esp32-poe board
** Target board: Seeed Xiao esp32c3 board
** Baudrate: 115200*8
** Connection:
UART i…
-
https://learn.adafruit.com/usbtinyisp/download
http://www.instructables.com/id/How-to-program-a-AVR-arduino-with-another-arduin/step5/Burning-USBtinyISP-firmware-to-an-attiny2313/
I need a 12Mhz Osc…
-
I've installed two-boot on my PPP/ Enterprise Edition, purchased 2022.01.27. tow-boot is v.2022.07-006. I can boot Mobian off of eMMC, and I can pwr+vol.up to get into USB mode, but I can not boot a…