-
Motherboard Asus ROG Crosshair X670E Hero.
```
# uhubctl
Current status for hub 6-5 [174c:3074 ASUS TEK. ASM107x, USB 3.00, 4 ports, ppps]
Port 1: 02a0 power 5gbps Rx.Detect
Port 2: 02a0 powe…
fpoto updated
9 months ago
-
Hello, I have a problem with wfi mode on Rpi5:
**# WIRINGPI_DEBUG=1 gpio -g wfi 4 rising**
gpio: wiringPi debug mode enabled
wiringPi: wiringPiSetup called
GetPiRevision: Revision string: "Revis…
-
I'm trying to at least get softdevice enabled but I stumble upon this panic error
I know that it's relevant to #16 and #18 but I'm not sure how to solve it. I don't use RTIC.
My target is an nrf…
-
**Describe the problem you have/What new integration you would like**
* Similar to the [LD2410](https://esphome.io/components/sensor/ld2410.html) Module, the LD2420 is a 24GHz Radar Sensor
*…
-
Hi, it would be great if you could try it with a DVI PMOD too,
I made a 16-bit version (RGB-565) of the icebreaker-pmod that should be possible to handsolder.
https://github.com/jbilander/icebreaker…
-
### What feature would you like to see and why?
Can someone update the HackRF One to use a USB-c connector instead of a microUSB? The pinout and everything else can stay the same (no interface update…
-
**Current behaviour**
Currently the tcp-connection-endpoint.js always answers to the commands CHANNEL and PASS with +OK
In the case of the CHANNEL command, this leads to endless connection request …
-
**Idea**
VBUS must be disabled to simulate charging or not charging with the dock to the watch.
**Requirements**
Use a low-profile switch to reduce the height of the dock and make it possible to la…
Kampi updated
9 months ago
-
**Describe the bug**
I'm trying to program nrf82540-dongle using rust, and i made a (hello-world program)[https://github.com/DeepSOIC/nfr52840-dongle-rust-test]. Connected a CMSIS-DAP probe (raspbe…
-
- [x] I am running an official build of TWRP, downloaded from https://twrp.me/Devices/
- [x] I am running the latest version of TWRP (https://dl.twrp.me/s3ve3g/twrp-3.2.3-0-s3ve3g.img.tar.html)
- [x…