-
Hi, I'm trying to make esphome work under ubuntu by trying to run [Jeff Geerling's example](https://www.jeffgeerling.com/blog/2022/esphome-on-raspberry-pi-pico), but it fails with the error down-below…
-
I'm having a very similar (perhaps identical) issue to #1561 and #1479. I'm using the EEPROM library exactly as documented and I'm not doing anything weird like manually idling core1 or disabling inte…
-
**Arduino Nano 2040 Connect**
I uploaded Blink with settings as _TinyUSB_ & _16mb Flash._
**Blink** works, so it isn't bricked, but I cannot re-enter the **_programming mode_**. No drive shows up,…
-
### Board
esp32
### Device Description
not important
### Hardware Configuration
not important
### Version
v2.0.3
### IDE Name
platformio
### Operating System
linux
…
-
Hi i am new to this thin and i have a Problem.
I tried to install this to a new nsPanel and it always failed (it yust randomly quits and home assistant restarts). I then changed the version from main…
-
### Question
how to flash the nspanel for the first time
### Additional Details
I get this message and I don't know what I'm doing wrong.
I tried to flash the nspanel for the first time.
can an…
-
A dynamically allocated Servo will infinite loop when `attach`ed if the program uses a large amount of static memory.
I am using platform.io for the build system with the following platformio.ini f…
-
Hi there,
we stumbled about weird behaviour of the Servo library yesterday. Our setup uses one standard servo connected to pin 2 of the Pico board and the Arduino tools with the servo library. That s…
-
I am running a rather simple code on my raspberry pi pico (RP2040), and testing the communication with the Arduino IDE serial monitor is working great.
Problem is, when I run the communication in the…
-
### Board
ESP32 PICO D4
### Device Description
Plain ESP32 PICO D4 on a breadboard.
### Hardware Configuration
Blank device only the USB Port is connected
### Version
v2.0.13
### IDE Name
Ard…