-
Hi,
I'm trying to run Arducopter following the BBB Mini software, but if I try to run any test software or arducopter I'm receiving this segment fault
(gdb) run
Starting program: /home/debian/ardupi…
-
I posted this over at reddit This should be all the secret sauce code we need, save for integrating the pressure altitude function, etc. Its C based code and should be simple to roll into the current …
-
Looking for definitive pinouts and settings based on the latest .5 beta code. These are the latest pinouts most are using but the RY835AI shows multiple trigger grounds... should we be using or tying…
-
After successfully building the IDE on a 32Bit machine I get these error message, when I want to compile something:
Cannot run program "/home/eagle/Downloads/Arduino-esp8266/build/linux/arduino-1.6.1/…
rfamp updated
9 years ago
-
Hi, I'm newbie in Openhab, and I have got strange problem with temperature value display from DHT22 temperature and humidity sensor,which I can not cope with . I'm using OpenHab 1.6.1 on Raspberry PI…
-
Hi There
I tried using a Ublox Neo-7M with cleanflight (naze32) and i have no luck on the Z axes of the magnetometer. I even let hobbyking send me a replacement for the module and tried both of them …
-
The example provided for the **BMA222** works fine.
For the **TMP006**, there's no example provided.
Reuse the library and sketch from the Educational BoosterPack MK-2 and
- Use the address `ADR1_…
-
I'm using a BMP180 pressure sensor hooked up to a Raspberry Pi on the I2C bus. I read the data from the sensors using your BMP085 library. This works fine in general, but sometimes I get bogus values …
-
Original [issue 56](https://code.google.com/p/souliss/issues/detail?id=56) created by fazioa on 2014-03-24T11:22:48.000Z:
What steps will reproduce the problem?
1.Add a T54 in Souliss Sketch
2.
3.
W…
-
```
What steps will reproduce the problem?
1.Add a T54 in Souliss Sketch
2.
3.
What is the expected output? What do you see instead?
T54 it's a Pressure Sensor on Souliss Framwork but show's a Lux Se…