-
We got lots of use cases when the type of Device Resource is integer with a float scale, such as 0.01, and the precision lost after transformation. It is the usual case in Modbus devices.
For exampl…
-
Hello kai, thanks for directing me here from the Play Store app page.
This particular BLE device I'm working on uses a Telit chipset. This simplified version of your Play Store app does not seem to…
-
Hello,
We are trying to use the ESP32-PICO-D4 and were told to use the AT BIN files for the WROVER, which should work on the PICO. We had tried the WROOM-32 but that did not boot, but the WROVER on…
-
## Environment
- Development Kit: none
- Module or chip used: ESP32-WROOM-32
- ESP-IDF: v4.0-dev-385-g853dd3ff7-dirty
- Build System: make
- Compiler version: xtensa-esp3…
-
After pairing, in the setting I see the radio. When I select other menu items it just sends the radio into a boot loop.
ets Jun 8 2016 00:22:57
rst:0xc (SW_CPU_RESET),boot:0x17 (SPI_FAST_FLASH…
-
### Hardware:
Board: ESP32 Dev Module
Core Installation version: 1.0.1
IDE name: Arduino IDE
Flash Frequency: ?40Mhz?
PSRAM enabled: no
Uplo…
-
Hello!
I have an issue!
There is an device called "FoodLock". And this device locks the door and it is an gatt server.
The task for me is to control the Lock using esp32.
It was verified that the …
-
Tell us which versions you are using:
- react-native-ble-manager v6.2.4
- react-native v0.44.0
- Android S7(SM-G930U) 6.0.1, Samsung J7 7.0 & Samsung A5 7.0
I have an app that scans for par…
-
I cannot find any documentation or examples relating to how to connect two of these boards with Bluetooth classic rather than BLE. I have posted on the forums, and the only help provided is with the …
-
I get the following error messages when compiling ...
```
"/home/heikoch/bin/arduino-1.8.5/hardware/espressif/esp32/tools/xtensa-esp32-elf/bin/xtensa-esp32-elf-g++" -DESP_PLATFORM -DMBEDTLS_CONFIG…