-
For a layer of type `fill-extrusion` there is a property `fill-extrusion-height` used to draw the height for the feature. And the unit of this property is `meter`.
https://www.mapbox.com/mapbox-gl-…
-
## The dependency [antd](https://github.com/ant-design/ant-design) was updated from `3.17.0` to `3.18.0`.
🚨 [View failing branch](https://github.com/alanrsoares/frontend-primer/compare/master...alan…
-
Hello, I found a strange correlation between nozzle size, first / other layer heigths and extrusion widths, which seems not logical to me, for example
layer heigth 0,2mm / nozzle 0,5mm, result in an …
Jobii updated
6 years ago
-
I use the skirt feature to easily prime my extruders before printing (its intended primary use, i think) - no need to have any kind of wiper or such.
With a dual extruder setup, both extruders print …
-
#### If this is a feature request describe it here
My snapshots aren't stabilized properly. The printer is still doing the stabilization movement, but the snapshot appears to be taken at the wrong ti…
-
Bimserver version:|1.5.101 (and older from sporadic tests)
-- | --
Render engine name | IfcOpenShell
Render engine version | IfcOpenShell-0.5.0-dev-2
Render engine plugin version | 0.5.26
Serve…
-
Hello,
comparing two GCode files (one made with v1.2.5 and one made with v1.1.7) I found a different behavior concerning the perimeters.
The pictures below show each the 2nd layer.
3 Perimenters: re…
-
consider the situation: I'm printing a tiny object. I surround it by a distant brim to increase layer printing time (to fight problems with cooling).
The model (simplified during bug hunt): a 10 mm hi…
-
Print outer perimeter offset by half the width of the extrusion. Then half of the nozzle will be closed by the previous perimeter, this is equivalent to a decrease diameter of the nozzle.
something l…
-
See http://www.thingiverse.com/thing:100850
I included a graph i drew with dimensions. Apologies for amateuristic explanation.
The GCODE slic3r 0.9.9 generates (also older) says object in Y direction…