-
Hello,
I have installed this library in my project using the ESP-NONOS-SDK-v2.2.0. However, the UDP part is not working. I am initializing the espconn structure with the UDP configured and then i a…
-
A concrete first alpha goal for the library is to support the following example program.
The program is a simple C user program exposing a hardware button and a hardware LED as a WAMP component in …
-
Hello. I have been experienced crashes on `publish`. My sketch publishes on three topics every second, and the crashes always happen on the second or third `publish` invocation for each round. Here ar…
-
Hello Martin,
first thanks for the job you did so far, well done!
For a special use case I need to have the some ip addresses for clients, if I'm directly connected to my router or go other…
-
Hi,
thanks for your great job but I could not compile the project. I am using Ubuntu VM and not a linux guy at all. I set the xtensa path
(XTENSA_TOOLS_ROOT ?= /opt/esp-open-sdk/xtensa-lx106-elf/bin…
-
Hi, thanks for WireGuard Implementation on esp32.
I am trying and it runs well.
I noticed that all traffic goes through the VPN. It would be helpful if at least DNS requests used the local STA conn…
-
Hi,
I tried your app as repeater with a Wemos mini D1.
Flashing works fine, but after flash is finished and reset of the chip no SSID "MyApp" is found.
Is this a known issue?
-
I'm using pppos to communicate with a SIM800L module.
All connections work except for RPC responses which get sent by the device but are never received by the mDash server, the SIM is a specialised…
-
Hello,
When a page with websockets active has a link for another page that needs to establish another websocket connection and the target is the same, ESP crashes.
If the link has target="blan…
-
I've been chasing an issue where data packets sent by an esp8266 get systematically lost. My linux system sends a stream to the esp, which runs arduino 2.4.2 using LwIP2, and the sketch on the esp sen…