-
When I was moving the power connection to @MatthewCroughan and @ajlennon's 3D printers I noticed that two of the three of them had the extruder sat at ~140 deg C. Neither of them have been printing f…
-
Before reporting, check if your problem is here:
https://github.com/eyal0/OctoPrint-PrintTimeGenius/wiki/Common-problems
Please fill this out:
OctoPrint Version: 1.3.10
PrintTimeGenius Versi…
-
Thank you for useful tool.
Pin#11 and Pin#13 of orangepi_zero_plus2_H3 don't work.
This address doesn't continue.
import OPi.GPIO as GPIO
from time import sleep # this lets us have …
-
Hi Dan
I see there is somebody on this page that had questions about this in the past. I also have a Orange Pi One.
I want to be able to switch 21 channels/relays with it but SIP will not start. I g…
-
Please, let me say first that I have no issues installing Hassbian on my Orange Pi Zero but I haven't been able to install Hass.io and make it run and up yet.
I have tried with Ubuntu_bionic_next_4.…
-
Hello,
I made this simple system monitor screen for my OrangePi Zero and ssd1306(128x64)
It shows a CPU load histogram , RAM usage bar, CPU thermometer bar and system uptime.
I saw a histogram…
ghost updated
5 years ago
-
I'm running this on a Pi zero W using the work arounds in the talkiepi project. It's up and running and connecting to the channel and receiving audio. However when i start transmitting the user is sho…
-
For the past couple of days I have tried to build Armbian for OrangePi Zero Plus2-H3, but even though it did succeed a week ago, since a couple of days I am getting errors from building u-boot.
`…
-
Which Components do I need to buy for the PCB?
ghost updated
5 years ago
-
## Creating a bug report/issue:
#### Required Information:
- DietPi Version | ```cat /DietPi/dietpi/.version```? DietPi_OrangePiZero-armv7-(Jessie)
- SBC Device (EG: RPi 3)? Orange Pi Zero
- P…