-
The recent change to rounded rectangular pads for the SMT caps and resistors made the gap between the pads on the 0805 footprints less than the 0603 footprint. I check a bunch of datasheets and other…
-
Just received (april 2018) TS100 from banggood and is version 1 pcb. Put the test fw and is reporting 029 060 (also opened and looks like pcb1). **Device freezes after few minutes.** Tip temp goes dow…
-
Please do work for this task in a branch called issue-62.
This is a task list for OPQBox3:
**Prelude:** We need to evaluate a replacement for RPi Zero W, and pick a stable KiCad version for this des…
-
First off, thanks for making this awesome piece of hardware open! It opens the doors to some very cool operations.
It seems that the released Gerber files are incomplete. There is no GBO (bottom si…
-
Currently the PCB files are provided in gerber file format which are only used as input for manufacturing. These are generated output, not actual reasonably easy to modify _original_ source files. If …
-
Hello,
I'm interested in having PSLab hardware. But I don't know the steps to fabricate one, since SMT assembly isn't available in my country.
Are you willing to sell ready-made PSLab kits throu…
-
Hi,
hopefully Iam right here
#787
doesn`t work for me.
Iam running a fresh installation of 146 on the RPi zero w and it says "wlan0 No such device"
But in the config Wifi is enabled.
Anyth…
-
I have some elements that I want to include in my schematic and BOM but that do not have a footprint. One example may be FPC cables or RF antenas or even a case for a PCB.
I am wondering if there i…
-
Hi,
I have 2 questions about soldering via a pick and place method. #18 refers to the item #18 in the BOM attached.
1. #18_P2 p/n: 9-146282-0 this is a 40 pos single row connector, yet P2 is a d…
-
https://github.com/sinara-hw/Booster/releases/tag/v1.1_rc1