-
After flashing the bootloader and then dfu-ing the firmware i'm getting segfaults when the app starts.
I'm using a bluepill as a blackmagic probe. This gives me gdb access. Loading the symbol files…
-
The last character of the notification message is replaced by the trailing zero, and won't be displayed.
This led to the implementation of a [workaround/hack in Gadgetbridge](https://codeberg.org/Fre…
JF002 updated
3 years ago
-
I have been working on a modified clock for the wasp-os on the PineTime and gadgetbridge.py was performing as expected but has suddenly stopped working. I have the modified Gadgetbridge app install o…
-
I'm working on [this issue in InfiniTime](https://github.com/JF002/Pinetime/issues/60) : race conditions occurs during sleep/wakeup and something put the devices (spi) into an incoherent state (I thin…
JF002 updated
3 years ago
-
Hello,
First of all, congratulations on this project.
I would like to make a port to work on the TWatch-2020, which is a watch based on the esp32 chip.
Screen: ST7789V
Axis Sensor: BMA423
RTC: PC…
-
Add the possibility to use other programmer/debugger than the JLink.
Ex : OpenOCD and Black Magic Probe
JF002 updated
3 years ago
-
I cannot run the bootloader-compatible version. It gets stuck at the bootloader screen.
```
$ make pinetime-mcuboot-app
$ imgtool.py create --align 4 --version 1.0.0 --header-size 32 --slot-size …
-
Based on a tutorial I followed and help from @lupyuen on issue #65 (mine, now closed), I'd like to contribute to this repo and his (and perhaps others) as I am absolutely loving learning and hacking w…
-
I managed to create my MakeFile but after that when I want to "make" it, I get these errors at 35% :
arm-none-eabi-gcc: error: BOARD_PCA10040: No such file or directory
arm-none-eabi-gcc: error: …
-
Not sure what the cause is yet but OTA firmware updates are not working after pushing 0.9.0
Error:
================================
== ==
== DFU Serv…