-
Hi,
I'm using a 64x64 matrix (the one sold by Adafruit) with their bonnet to display cycling animations. I'm doing this using Python 2.7 both on a PiZero W and Pi 3B+ although I would much prefer t…
tohox updated
5 years ago
-
I've recently starting using the PiJuice HAT for a project. I am using Raspberry Pi OS on a Pi 4B. The only other hardware attached is a HQ Camera module. I'm using the default battery (1820mAh).
T…
-
I've noted a few older threads on this...those fixes either did not quite match or the fixes did not work for me.
I've installed a PiJuice onto a Pi 3b. The Pi is actually an EmonBase so I did not…
-
So in order to provide the high res 4-lane CSI, the i2c pins are needed. The i2s interface is also needed for sound capture from HDMI. By counterpoint, the CM4 exposes ADC interfaces on the SOM connec…
-
```
davidg@pinas:~/pinas/Projects/301_Sense_HAT_Python$ sudo python3 ./hello.py
[sudo] password for davidg:
Hello, world!
Traceback (most recent call last):
File "/home/davidg/pinas/Projects/…
-
Hi
I tried with much frustration to get this to work.
I was using the web server to -> config -> sensors and choose sensor A as the BME sensor to 280, on bus 77
I was able to check via a python …
-
Because Raspberry OS is now on 64bit kernel after last update it seems PortAudio have a problem to communicate to ALSA layer.
Fortunately it is possible to swich back to 32 bit kernel after update it…
-
When I issue the build command I have this error, following by several others:
make: Entering directory '/src/node_modules/rpio/build'
CXX(target) Release/obj.target/rpio/src/rpio.o
CC(target…
-
Für die Steuerung der CNC Fräse setzen wir aktuell auf cncjs das auf einem Raspberry Pi läuft.
Da daran immer mal wieder rumgespielt wird ist es wichtig, dass ein Neuaufsetzen möglichst einfach mög…
-
I originally tried using meOS version 20200606 for Raspberry Pi 4 but discovered there are a plethora of issues with the 8GB version and that even after being able to boot into the OS, users were havi…