-
### PROBLEM DESCRIPTION
I am using a vl53l0x distance sensor with latest tamota firmware (12.2). However, I noticed an issue when the sensor data is published to home assistant. Basically the tas…
-
Hello!
I would like to use this library to read data from two independent DHT11 sensors. Is it possible? I tried to define DATA pins as:
DHTStable DHT1(DATA_PIN);
DHTStable DHT2(DATA_PIN);
Simil…
-
tinygo build -o ./dht11.hex -size=short -target=d1mini .
# tinygo.org/x/drivers/dht
../../../../../../../../root/Documents/GoprojectLinux/pkg/mod/tinygo.org/x/drivers@v0.17.1/dht/constants.go:105:10…
-
I have 6 DHT22 sensor connected to a WifiMkr1010 Board (sensors connected via a MKR Connector Carrier board on D0-D5)
Until recently I used DHTStable library (1.0.1) which worked fine but I ran onto…
-
I have just upload the new ESP8266 release, and activate the DHT since I'm using a Shield DHT11 with a ESP-01.
![image](https://user-images.githubusercontent.com/104778761/166746026-73f8bc09-7899-47f…
-
I am trying to use the gpio pins to read in data from a DHT11 temperature and humidity sensor. However, when I pass my pin to the [new](https://docs.rs/dht11/latest/dht11/struct.Dht11.html#method.new)…
-
I have seen several posts in other forums talking about the challenge of including a temperature sensor in the same enclosure as an ESP32 (or any other microcontroller} due to excess heat creating ina…
-
### Describe the bug
同一台设备: R619AC 【竞斗云】 IPQ40XX with 宽翼B806u 4g 模块 BM806U
用同一个版本:x-wrt-23.06-b202307110013
同一天您编译的固件有4G qmi 协议. x-wrt-23.06-b202307110013-ipq40xx-generic-p2w_r619ac-128m-squash…
-
- [Y] I have read the [README.md](https://github.com/flyte/pi-mqtt-gpio/blob/develop/README.md) file and visited the [Documentation](https://mqtt-io.app/) to see if the information there helps.
- Als…
-
Hi,
I'm struggling with getting the docker container to access the GPIO. I'm running a raspberry pi 3B+ with raspbian. I've attached a AM2302 on pin 4 and configured pi-mqtt-gpio as follow:
```
mqt…