-
Hello! I have a problem... I'll tell you...
I have made a program that works on Arduino Uno, it only uses the EEPROM library, the rest of the functions are "normal", digitalWrite, Millis, If and case…
-
as mentioned: With this firmware (U_1-05112018.hex) I can't use avrdude to flash a attiny85. With a usbasp it works well, therefore the attiny seems working and the wiring should be fine.
VCC 5V
GN…
-
Hello peter,
my question is perhaps stupid but I would like to know if my project is feasible:
I want to use my pyboard to :
1. load a file from my PC
2. program a 24CL64B which is on another …
-
I don't have any experience with development for PIC processors, so please excuse my ignorance regarding development environments. I have successfully used the MPLAB X IPE to program the hex file into…
-
Hello Tertius,
First of all, thank you for your work and developing this software.
After managing to configure the MQTT server this is what I am getting when trying to connect to my control panel.
…
-
i am encountering an issue my keyestudio arduino leonardo wont flash on 0.1.1 and on 0.3.1 i updated drivers to Arduino LLC later but i was encountering this from receiving it. it was a caterina devic…
-
Hi Tom, I wonder if you can offer any advice on my issue.
I'm on a Mac. I have installed lrzsz using Brew. I then use the screen command to connect to the TommyPROM. Press w and enter, then press c…
-
I am trying to import this into CCS and it is missing all the project files.
Please add:
.ccsproject
.cproject
.project
And perhaps the .settings folder.
No, I have no clue what I am doing wit…
-
I didn't solder LEDs to the keyboard myself so I'm unable to test and implement this feature myself. It shouldn't be hard to do, using the visualization framework.
If you either want to test or imple…
-
### Time line
- [Maxwell's demon: Does life violate the 2nd law of thermodynamics? | Neil Gershenfeld and Lex Fridman](https://www.youtube.com/embed/eS0JXViv0cU?start=81&end=281&version=3), start=81&…