-
### Basic Infos
#### Hardware
WiFimanager Branch/Release: Development
Version 0.12.0 (per Arduino Library Manager)
Hardware: NodeMcu 1.0 (ESP12-E module)
Core Version: Version 0.12.0…
-
Hi @edwardtfn
I fight with a similiar Issue and don't know what else I could try. I allow me to share my logs as well and hope you have a tipp how to bring my Display to comply.
Thanks!
```log
…
-
**Please make sure to go through the recommendations before opening a bug report:**
[https://github.com/mathieucarbou/ESPAsyncWebServer?tab=readme-ov-file#important-recommendations](https://github.…
-
Current protocol between printer and ESP3D use raw serial which is ok for GCODE communication but no really efficient for file transfer
More over if some output come from printer board due to auto se…
-
Hi all, as the subject says I have been having issues connecting with the MQTT broker, even using the most basic sketch, what happens is that nodemcu will connect to WIFI just fine but then will strug…
-
Serial Monitor
[FROM M5Burner] COM3 opened.
[ 16270][I][display.cpp:545] loopOptions(): Number of options: 2
[ 19611][W][sd_diskio.cpp:104] sdWait(): Wait Failed
[ 19615][W][sd_diskio.cpp:512] ff_…
-
### Basic Infos
#### Hardware
WiFimanager Branch/Release: Master 2.0.5 Beta
Esp8266/Esp32: Esp8266
Hardware: ESP-12e, esp01, esp25
ESP8266EX Tensilica Xtensa
Core Version: 2.4.0,…
-
Hello :)
I am using the EspHap_Switch example. I have set the ssid and password to match my network. _#define ENABLE_WIFI_MANAGER_ is commented out.
I have successfully connected the ESP to my h…
-
I have a program that I've had running for over a year on an ESP8266. It uses Elegant OTA and works great. I've now purchased a ESP32 to run this program due to its increased "horsepower" I'm using Pl…
-
As the developer of the Heishamon software I would like to discuss the posibility to add upgrading through the home assistant heishamon integration. I am not a python developer and am not a frequent u…