-
MMM-YouTube works normally the first time you ask MMM-AssistantMk2 to play something but if you ask it to play something else only the audio works, while there is no sign of the new video
-
Hi
I've buyed a Raspberry Pi 4, 2gb RAM. Before I've had the Raspberry Pi 3 with PiFmRds working. Now I've installed PiFmRds on the raspi 4 and when I run the command, the console says me that it's w…
-
# Building a GPS based time server | Jacob Deane - geek, photographer, engineer
Time is an illusion. Lunchtime doubly so. This is a rough guide of how to build a super accurate NTP time server on a r…
-
Cloning mpu9250 onto a pi zero and running ```cargo run --example rpi``` follows the same steps consistently:
First time gives: ```thread 'main' panicked at 'called `Result::unwrap()` on an `Err` v…
-
### The problem
I haven't confirmed that the code does not work. I have tried a python program that uses the same UUID's as used here and it does not work.
This is the current module UUID's the sam…
-
Hello boochow, thank you so much for your test projects for the Pico Pi. I am completly new to Raspberry Pico Pi and have very little knowledge about coding. But I wanted to try something with the Pic…
-
Hi
I got Jetson nano and Jetson nx
B0279 is work at Jetson nano but not work with jetson Nx
(installed driver by 0.03ver script)
But, B024902 is no problem both
both use same kernel ( R3…
-
### Creating a bug report/issue
- [x ] I have searched the existing open and closed issues
#### Required Information
- DietPi version
G_DIETPI_VERSION_CORE=9
G_DIETPI_VERSION_SUB=2
G_DIETPI_V…
-
I've noticed that if I set the baud rate with spiOpen to x, I measure a frequency of 2x on the SCLK line. For example, setting baud to 100000 gives me a 200kHz clock. I am wondering if anyone else has…
-
Hi,
I am experiencing a problem when trying to open a serial port using 128000 baudrate on RPi 3 Model B v 1.2. The Pi supports this baudrate using Python serial library just fine.
The issue do…