-
My Modbus server only supports one thread but has multiple devices. For that only the first device telemetry is showed in thingsboard.
I would like to know if is possible to configure the modbus.jso…
-
**Describe the issue**
Hi,
When the thingsboard_gateway service was running, We execute the mqtt_firmware_client.py. After that we are getting this log. So we are wondering this status will create a…
-
**Describe the bug**
BLE attributes read for BLE UUID "00002A00-0000-1000-8000-00805F9B34FB" (corresponds to standard BLE connected 'device name') reports Exception error. (Please refer corresponding…
-
i have used these commands to generate server.pem ( self signed certificate ) and server_key.pem (privarte key)
openssl ecparam -out server_key.pem -name secp256r1 -genkey
openssl req -new -key se…
-
Hi, I am really struggling to link my own instance of ThingsBoard CE edition to my AWS IoT MQTT feed. No matter what documents I read, it still doesn’t make sense.
I _assumed_ that I could get Thin…
-
**Describe the issue**
I configured the iot-gateway to receive and publish messages from the TTN MQTT broker.
While the connection is OK, the messages arriving on the MQTT broker (and confirmed wi…
-
**Describe the bug**
‘BrokenPipeError: [Errno 32] Broken pipe’
Steps:
1. 3 BLE end devices connected to TB gateway.
2. notification data received for 3 min intervals.
3. devices remains disconne…
-
**Describe the issue**
I've installed the Thingsboard gateway in my NanoPi device. I attempt two times (1) Installation from Pip and (2) Installation from sources (Latest version). Both times, I can …
-
**Describe the bug**
BLE Connector clients - TB Gateway release ver 3.0, not able to connect to multiple devices on startup. Bleak multiple clients fail to connect concurrently to all devices.
Tes…
-
**Describe the issue**
There is no provision for Flow control using GPIO in Modbus Serial connector. I think it is necessary to have this option. Is there a workaround ?
**Connector name : modbu…