-
No details are available for how to utilise MQTT while running ESP MESH LITE.
The user guide mentions that MQTT can be used.
Would be an excellent improvement if an example was created that showed M…
-
I am using the most recent version of OpenWRT (21.02.1)
```
root@OpenWrt:~# opkg list | grep ath10k
ath10k-board-qca4019 - 20201118-3
ath10k-firmware-qca4019-ct - 2020-11-08-1
kmod-ath10k-ct -…
-
I don't know what is causing the issue but It is happening to me since forever. I have been using localTuya from the past 4-5 months and I see some devices (mostly plugs) go unavailable and be back av…
-
Device: Linksys 3200ACM
Software: OpenWrt 22.03.0-rc4 (issue also occurred on 21.02 ), issue did not occur on 19.07, reflashing back to 19.07 corrects the problem.
Device Driver [mv88e6xxx-1:00]…
-
**Distribution (run `cat /etc/os-release`):**
```
NAME="Pop!_OS"
VERSION="22.04 LTS"
ID=pop
ID_LIKE="ubuntu debian"
PRETTY_NAME="Pop!_OS 22.04 LTS"
VERSION_ID="22.04"
HOME_URL="https:…
-
All works only few seconds after connection. Signal level is about 2% in a meter away from the router :(
dmesg:
```
[ 2084.170642] Chip Version Info: CHIP_8188E_Normal_Chip_TSMC_A_CUT_1T1R_RomVer(0)…
-
**Is your feature request related to a problem? Please describe.**
It would be super cool if I didn't need to use USB to SSH to my pwnagotchi. What if, when a predefined BSSID (or BSSIDs) is detected…
-
```
Please describe the feature you would like to be implemented into Reaver.
English only.
MAC Address last character changer to speed up the attack.
Well, some times the AP will reject the "EAPOL …
-
```
Please describe the feature you would like to be implemented into Reaver.
English only.
MAC Address last character changer to speed up the attack.
Well, some times the AP will reject the "EAPOL …
-
```
Please describe the feature you would like to be implemented into Reaver.
English only.
MAC Address last character changer to speed up the attack.
Well, some times the AP will reject the "EAPOL …