-
# Compatibility Report
- Name of the game with compatibility issues: Chip's Challenge 1
- Steam AppID of the game: 346850
## System Information
- GPU: RTX 3060 Mobile dGPU/AMD Vega iGPU
- Drive…
-
% python miniagi.py "Perform a penetration test of the host 192.168.86.197. Use tools and manual analysis to identify vulnerabilities on the system. If necessary, search for information on specific se…
-
Hello!
Thank you for this great lib!
I am trying to print on a RS232 ESC/POS Thermal printer, I was successful printing with a RS232TTL adapter (MAX3232 chip) on a dedicated basic program for …
-
```
I'm trying to compile optiboot with EEPROM support for m328. Enabling BIG_BOOT
results in an error by the linker complaining about a section overlap. Has this
been tested by someone lately?
Wha…
-
I ordered 4 panels, and to my surprise they didn't come with FM6126A chips, they have some ICN2053BP chips I haven't seen before (normally they're ICN2028BP)
So far, haven't been able to get them to …
-
Needed some help with my attempt.
Chip: [ESP01_1M](https://vi.aliexpress.com/item/1005005777409596.html)
Says
tx_pin: GPIO4
rx_pin: GPIO14
So I edited the code to like this but cant seem …
-
```
What steps will reproduce the problem?
1. Restart a modern Uno board (seen on R2 SMD, and Uno R3) by applying power,
or by using the RESET button (or upload.)
2. Observe L led for start flashes.
…
-
```
What steps will reproduce the problem?
1. Restart a modern Uno board (seen on R2 SMD, and Uno R3) by applying power,
or by using the RESET button (or upload.)
2. Observe L led for start flashes.
…
-
```
What steps will reproduce the problem?
1. "make atmega8_isp" (assuming you've got updated source that has that target)
What is the expected output? What do you see instead?
expected output is t…
-
Perhaps a needless issue, but just wanted to note here that after many tries, a clip did wind up working for me. Perhaps there is enamel or flux or something on the pins, or they need to be bent in sl…