-
rst:0x1 (POWERON_RESET),boot:0x37 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:1
load:0x3fff0018,len:4…
-
### Bug report
**What is the problem?**
It was noticed that the AC mesh is no longer booting when it is upgraded to gluon 2022.1.2. This was also noticed on following other devices (but debuggin…
ecsv updated
10 months ago
-
DHT22 registers as type 70 in `0.4.14`. Works as intended in `0.4.13` where it registers as type 22.
-
Good evening,
Being a beginner in the arduino, I am currently experiencing a problem with my program. I try to read the data sent by a DHT11 type sensor.
I have correctly installed the library t…
-
this is my code
I want to print pt100 data 5 times every seconds, but this timer just printed 5 times after it will not print anything
```C
#include
#include "DHTesp.h"
#include "Ticker.h"
#i…
-
### Describe the bug
同一台设备: R619AC 【竞斗云】 IPQ40XX with 宽翼B806u 4g 模块 BM806U
用同一个版本:x-wrt-23.06-b202307110013
同一天您编译的固件有4G qmi 协议. x-wrt-23.06-b202307110013-ipq40xx-generic-p2w_r619ac-128m-squash…
-
It's currently hard to tell that the following sensors are also supported by ESPresense when you look at the documentation:
* Temperature (DHT11, DHT22)
* Ambient Light (BH1750, TSL2561)
* Weather …
-
### PROBLEM DESCRIPTION
I am using a vl53l0x distance sensor with latest tamota firmware (12.2). However, I noticed an issue when the sensor data is published to home assistant. Basically the tas…
-
The rp-hal examples should be small and specific to the RP2040 hardware.
We should move anything that's really an example of interfacing with external hardware somewhere else.
Moving them under the …
-
### PROBLEM DESCRIPTION
I am using a vl53l0x distance sensor with latest tamota firmware (12.2). However, I noticed an issue when the sensor data is published to home assistant. Basically the tas…