-
```
it should be checked if set contrast works for this device:
U8GLIB_SSD1306_128X64
u8g(U8G_I2C_OPT_DEV_0|U8G_I2C_OPT_NO_ACK|U8G_I2C_OPT_FAST);
```
Original issue reported on code.google.com by …
-
```
it should be checked if set contrast works for this device:
U8GLIB_SSD1306_128X64
u8g(U8G_I2C_OPT_DEV_0|U8G_I2C_OPT_NO_ACK|U8G_I2C_OPT_FAST);
```
Original issue reported on code.google.com by …
-
Hi im noob to NFC but trying to make it run. Is PN532 NFC RFID module V3 red PCB.
Managed to conect it to Raspberry Pi3B+ via all 3 posibilities... Module is visible, library talks to module (nfc-lis…
-
Device name: ADS1015 and ADS1115 (Texas Instruments)
Protocol: e.g. I2C
URL of example product: https://shop.pimoroni.com/products/adafruit-12-bit-adc
Further information e.g. data sheet: Datasheet…
-
Hi, probably a stupid question...
I am on the stop of trying out this cool thing. But where and how do I configure the connection for vl53l1x time of flight sensor? I can not find it in your yaml. …
-
Seems like I cant specify on what adress my INA219 devices are listening on the bus. There is a reference in the .h file but I cant find any documentation on how to use it.
```
class INA219
{
…
-
I tried to implement an RFID/NFC reader thru I2C: PN532.
Documentation of the device is here: https://www.nxp.com/docs/en/user-guide/141520.pdf
Page 55 and Following describes the way to wake up the…
-
The Wire library has a function **void setClock(uint32_t frequency)** to set the I2C clock frequency.
It would be useful for (library) developers to be able to read the current clock frequency so I…
-
Not sure if this is a VeraCrypt or Bus Pirate 5 issue (I suspect the later) but everything works fine unless I connect the Bus Pirate 5 and try and mount a file, VeraCrypt will attempt but then beco…
-
```
it should be checked if set contrast works for this device:
U8GLIB_SSD1306_128X64
u8g(U8G_I2C_OPT_DEV_0|U8G_I2C_OPT_NO_ACK|U8G_I2C_OPT_FAST);
```
Original issue reported on code.google.com by …