-
3 hours ago nearly all of our servers produced a security alert, which contained following information:
`
Oct 24 06:25:50 : netdata : command not allowed ; TTY=unknown ; PWD=/etc/netdata ; USER=ro…
-
我是两台服务器，一台服务器做服务端一台做端口转发，这两台内网互通，当转发成公网可以正常连接，当转发内网的时候报错用户名密码验证失败，但是账号密码都是没有改变
Apr 07 11:38:31 HK_IPSEC pluto[13083]: "xauth-psk"[4] 192.168.2.221 #4: XAUTH: password file (/etc/ipsec.d/passwd) open.…
-
Using Libreswan 4.6 with multiple IKEv2 clients. The following error (leading to Libreswan crashing) occurs frequently:
```
pluto[X]: "ikev2-cp"[6] x.x.x.x #11: STATE_V2_ESTABLISHED_IKE_SA: retran…
-
What happened:
Globalnet adds a globalIP annotation to the Gateway node which is used as healthcheck-ip.
Ideally this annotation should be removed as part of `subctl uninstall ....` operation, other…
-
UPS: SMT1500I connected via USB
OS: Fedora
Current issue: When the UPS goes onto battery, the netdata plugin seems to not gather any further data until the UPS comes back onto power.
apcaccess…
-
Hi
We are using Libreswan version 3.29-2build1 on Ubuntu 20.04.2 LTS.
We have a problem where the Libreswan process is up and running and the tunnel is reported to be working by `ipsec status` com…
-
Hello, i added my own custom plugin in `charts.d.plugin` as `license.chart.sh` and when i run in debug made as `netdata` user it runs fine too -
```bash
bash-4.2$ /usr/libexec/netdata/plugins.d/c…
-
> Cluster "skitt-hub"
> ✗ Showing Connections
> ✗ No connections found
>
> ✓ Showing Endpoints
> CLUSTER ID ENDPOINT IP PUBLIC IP CABLE DRIVER TYPE …
skitt updated
2 years ago
-
Hi there! Cool project, thanks! I made something similar but yours is better :)
I was wondering, if you would be opposed to adding a few kernel modules, needed for IPsec.
The following kernel modu…
-
Running ubuntu 20.04 server with standard setup, added ikev2 to enable multiple clients behind same NAT to work. All good until recent update of ubuntu. After standard apt upgrade yesterday (03.16.202…