-
Hi,
I found this library and I've a simple doubt to be able to use it. From what I know when the module is receiving a call it sends a specific message. How this is handled by the library, is there…
jemos updated
7 years ago
-
la libreria MQTTClient nel branch develop è differente da quella in master.
Quale versione è ?
Inoltre gli esempi risultano modificati ed è stato completamente rimosso sim800Hello che è un signifi…
-
I have an Arduino Mega 2560 and a Adafruit Fona 808 shield.
When I use the Adafruit test sketch the serial monitor says "FONA is OK" and "Found FONA 808 (v2)" and I can run the test cases like read t…
-
I get this:
(I added some Serial output: ______ signifies we got a response. -------- signifies timeout in `waitResponse`)
```bash
Initializing modem...AT
### AT:
OK
______
AT+CFUN=0
##…
-
I try to Compile the DS3232RTC library and receive this error:
Arduino/libraries/DS3232RTC/DS3232RTC.h:137:26: error: 'tmElements_t' has not been declared
static byte read(tmElements_t &tm);…
-
This is the code I was trying : https://github.com/r-map/rmap/blob/master/arduino/sketchbook/libraries/sim800/examples/mqtt_basic/mqtt_basic.ino
Hardware using:
Arduino Mega + SIM808.
Works when …
-
It will be nice you add this parameters to HTTP constructor.
I'm currently overriding the constants:
````
#define SIM800_RX_PIN 2
#define SIM800_TX_PIN 3
#define SIM800_RESET_PIN 12
````
But th…
-
Hello,
i have a project "Wireless Sensor Network" and i need to do some operations with SIM800L, the problem is that i am using RF24 radio transceiver, and it uses 2,7,8,11,12,13 digital pins, but i …
-
Hi Calin Crisan. First, thank you for your work. I discover Raspberry and your distribution, it's so amazing and powerful. I have a question, I test your email notification with motionpie, it work gre…
-
I hope the [Aspen SIM800](https://github.com/aspenforest/SIM800) library will significantly ease the use of the SIM800 series GSM modules. Please add it to the library manager. Thank you.