-
Are you receiving `Starting LoRa failed` while using the demo code?
PLEASE see the [FAQ #1](https://github.com/sandeepmistry/arduino-LoRa#faq) about using [setPins](https://github.com/sandeepmistry…
-
The stereo audio injector seems to be causing some interference somewhere whilst I am trying to read the output of my two mcp3008 chips. they are both connected via software using the adafruit driver,…
-
The hard-SPI mode with device # 0 seems faulty. Observed aspects:
- the setting of phase and polarity does not have the expected result. Looking into the sources, the respective code seems wrong. || …
-
```
In Hibernate 3.3.0.GA there is new cache SPI (http://in.relation.to/9273.lace).
Will it be supported in hebernate-memcached?
```
Original issue reported on code.google.com by `anightl` on 2 Sep 2…
-
**_Reported by Michał Kruszewski:_**
Implement driver for Serial Peripheral Interface (SPI) Master and Serial Peripheral Interface (SPI) Slave.
(Imported from Jira ZEP-1992)
-
This was a helpful starting point, but it only works after fixing a couple of important SPI setup problems.
1. Instead of wiringPiSPISetup, it needs to use wiringPiSPISetupMode, with SPI_MODE=1
2. I…
-
It seems that there is an issue initializing the SPI in the sharp driver on the RP2040. I've tried switching to SoftSPI for the SPI.LSB with no success.
I'm not too experienced with MicroPython so …
-
Hi Travis,
I have changed this comment because I have just realised that I have confused I2C with SPI. Does Zeptoforth do I2C as well as I am trying to connect to an OLED display ?
Chris Trilsba…
-
In testing a recent PR I noticed that using the RFM9x Radio FeatherWing on a PyGamer (7.3.0-beta.2) when I have an SDCard plugged in the radio doesn't behave correctly. It will cause the same message …
-
Support for import of externally sourced flow data into Arkime so that it can be factored into network investigations and visualizations. Ideally support would be flexible in allowing an administrator…