-
Compiled with Arduino IDE 1.8.12
Errors shown
losing tmc_util.cpp & endstop.cpp
I have modified the pins_MEGATRONICS_3.h to add on X,Y,Z/Z2,E0 CS pins.
Added filament runout pin & modified temp_1…
-
I am trying to have my two displays both get their bitmaps from an 8GB microSD card connected via SPI. Here are the constructors I am using, for reference:
`U8G2_SSD1306_128X64_NONAME_1_SW_I2C u8g2…
-
Hi.
I have SSD1327 128x128 form waveshare.
The library working on SPI.
Unfortunately I2C does not work.
The display does not light anything.
I checked example code from waveshare and it works.
O…
-
Hello,
OLED module:
https://www.waveshare.com/w/upload/8/80/1.5inch_OLED_Module_User_Manual_EN.pdf
I have the same problem as described in #783 but U8G2_SSD1327_MIDAS_128X128_1_HW_I2C construc…
nikuz updated
5 years ago
-
Hello,
I'm using one SSD1327 OLED 128 x 128 connected via I2C.
Using this Constructor based on Issue #880, Running perfectly:
```
U8G2_SSD1327_MIDAS_128X128_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ …
-
Hello there!
I need a little help, I'm trying to figure out what kind of problems is these "artifacts" on the screen:
![problem 1](https://user-images.githubusercontent.com/13917335/60615876-8b6080…
-
I can successfully compile the firmware, but I get these warnings, and don't know if I should do something about them:
```
{
"resource": "/c:/Users/qwewer/Documents/Marlin/Marlin/src/lcd/menu/menu…
-
Hi Oli/All
Having a strange issue with a Nano and Midas SSD1327 128x128 OLED.
When my Program Mem goes above 96%, then some of my prints don't display.
I uploaded to a Mega and it works fine.
…
-
U8G2_SSD1327_EA_W128128_F_HW_I2C seems to be 128/96 not 128/128?
Tried multiple boards/screens/projects
I tried backdating U8g2 and noticed its a relatively new constructor
-
Raspberry Pi Zero W
Linux raspberrypi 4.14.98+ #1200 Tue Feb 12 20:11:02 GMT 2019 armv6l GNU/Linux
```
Traceback (most recent call last):
File "LinuxProject4.py", line 55, in
device = ssd1…