-
If I'm reading this right, I _think_ there's a race condition accessing the sys_position array.
sys_position is updated at interrupt time by the ISRs in stepper.c; but is accessed in multiple locat…
-
Hi,
I'm working on PID control for temperature ATM, and I find that changing the voltage is very slow, especially downwards -- e.g. changing from 4V to 1.8V takes about 1.5 seconds. Going up from 0 t…
cmock updated
8 years ago
-
This is a placeholder for all issues that are found during unit testing of PCB2.
-
Currently (2.8.1) the EBB firmware PO command is executed immediately whenever it is processed by the EBB. This may be in the middle of an already executing motion command (like SM) which may not be w…
-
Firstly, thank you for writing this plugin, it really does so much!
I have a PWM Output configured which drives a Fan via a MOSFET on the PWM line.
When I have it NOT linked to the Temperature S…
-
@Araneidae is writing support for this, and it looks like it would be useful on beamlines to have support for this as it is substantially cheaper than a TetrAMM and we could synchronize it easier
-
Hello,
I got an issue with communicating with a CSR8645 using a FTDI232R (A94FFLDD) and BlueSuite 2.5.8. I can't get any proper communication and the following error is always returned:
"20:49:4…
kcl93 updated
4 years ago
-
Hello,
First of all thank you for providing this PWM driver for OPI Zero.
As far as I can see tree folder must be created at every start up (I do not understand why).
I can NOT generate PWM on …
-
When I transmit to ECHO from my OpenRTX (3/11/23 nightly) MD-UV380G to my hotspot I get the following error:
M: 2023-03-12 16:14:43.604 M17, received RF **late entry** voice transmission from K9OJ …
-
Current approach with PWMing the enable signal isn't working great.
Research why, maybe find other methods for dimming backlight.