-
Mietimme jatkojohtoa, jossa olisi ääniohjaus eri pistokkeille. Johtoon voisi esimerkiksi yhdistää työ- ja yölampun sekä muita laitteita. Arduino voisi reakoida esimerkiksi taputuksiin ja eri määrillä …
pekma updated
9 years ago
-
Is it possible to learn not only 433 MHz, but also 315 MHz codes jon BroalLink RM2 Pro device? I have only 433 MHz device learning. Thank you.
-
array('I', [257, 857, 641, 481, 645, 428, 641, 476, 267, 801, 641, 476, 268, 854, 637, 481, 641, 422, 641, 748, 267, 850, 320, 908, 690, 481, 641, 422, 641, 481, 641, 423, 267, 908, 636, 428, 214, 903…
-
continuaste el desarrollo de este proyecto ?
intente usarlo con mi alarma, pero no tuve mucho exito tratando de encontrar los codigos.
parece que hay codigos que se envian muy rapido y el arduin…
-
Hello,
I 2 remote controls 433, one is detected as Protocol No. 1 while the other is not detected (has a coding with 12dip-switch).
How can I do to be able to receive the 12 dip-switch?
Thank you.
-
[see updated post below, this post I was confused...]
I followed your lead and used a [315MHz helix antenna](https://www.digikey.ca/en/products/detail/te-connectivity-linx/ANT-315-HESM/1962853). I …
-
Zigbee is becoming the de facto standard in home automation. It would be great if `OpenMQTTGateway` could support this protocol. Below I have a write up about the most promising solution at the moment…
-
Hello, where I should add modulation support code for squareroot2 modulation.? (I have not yet looked your codes at all).
I have esp32 + sym115 chip which I drive with 1/sqrt2 modulation and like t…
-
Please consider porting ESPEasy to the Sonoff ZBBridge a (new Sonoff Zigbee Bridge by Itead).
https://www.itead.cc/sonoff-zbbridge.html
Itead has just launched this Sonoff ZBBridge as an inexpen…
Hedda updated
3 years ago
-
So this is interesting: https://www.gelidus.ca/product/gelidus-research-ac-powered-ratgdo-compatible-board/
Integrated 120V outlet passthru. And upcoming "315Mhz RF module headers (New software fea…