-
I want to build an custom image for rpi4 on an Ubuntu 20.04.6 LTS.
I run the following command in cloned Repo Dir:
OMR_TARGET="rpi4" OMR_FEED_SRC="develop" ./build.sh V=s
I received many errors …
-
# Feature Description
- One-line feature description (can be used as a release note):
IPv4/IPv6 dual-stack support and awareness for Kubernetes pods, nodes, and services
- Primary contact (assignee…
-
**Describe the bug**
网络性能很差
**To Reproduce**
Steps to reproduce the behavior:
1. 下载20220409的固件
2. 刷到路由器上
3. 网页speedtest测速，仅100Mbps（不是94Mbps）
**Expected behavior**
之前补丁在的时候，pppoe下speedtest测…
-
Not sure if you have any ioT devices?
Since I changed to Ethernet, my Awair, Rachio, Range(General Electric), cannot get internet connection anymore. I ran their troubleshooting tools, from the su…
-
When implementing happy eyeballs logic to prefer QUIC IPv6 over QUIC IPv4 addresses, I've observed that a lot of the dial failures to IPv6 addresses are for addresses of this form `64:ff9b::192.0.2.33…
-
Hello,
I have jool installed on Debian 11, I have tried both the Jool that came with debian stable, and also installed 4.1.9.0 manually. But still I cannot get ICMP working from a client.
HTTP v…
-
```
$ OMR_TARGET="r2s" OMR_FEED_SRC="master" OMR_KERNEL="5.4" ./build.sh
```
```
WARNING: No feed for package 'libpthread' found
WARNING: No feed for package 'libc' found
WARNING: No feed for …
-
Hello!
Firstly thank you for all the efforts in making this possible. One issue I have found is that when I make a change to the Guest lan in the GUI (Local Network card) (such as change the primar…
-
So I have been trying to get IPv6 working on my DJA0231 which is connected to my Starlink setup
I have Starlink in bypass mode which is needed to get IPv6 to work
I followed this issue https://githu…
-
Sorry for the rough title, there's layers here.
TMobile's IPV6 implementation is breaking SSH down the tailscale provided tunnel. After finding a client that exposed some connection logs, I noted tha…