-
**What kind of device or service you would like to see an adapter for?**
Bresser Comfort Weather Center 5 in 1
**Is an official API including documentation is available?**
Nein
**Are other lib…
-
I have mainly 2 doubts,
1) I connected my LoRa transmitter (SX1276 OF 868Mhz) to arduino NANO 3.3 V pin and LoRa receiver to arduino UNO (3.3V pin). The SPI frequency was set to 8MHz. The spreading f…
-
Can you introduce a module that supports: 300-348 MHZ, 387-464MHZ /. 779-928MHZ cc1101 module with multiple frequencies?There are restricted modules on the market!
-
1. Stratux version: v1.6r1
2. Stratux config: dual SDR, GPS yes adafruit MTK3339 , AHRS no, vehicle 12v-5V USB power.
3. EFB app and version Ozrunways 10.3.7 . EFB platform ( iOS 14.8.1). EFB hardwa…
-
Hi,
I'm new to embedded programmation and I'm currently facing an issue on my UNO R3 + SX1272 configuration. (objenious network, 868MHz, France)
I'm working with the ttn-otaa given example.
I se…
-
Hi, i have 2 ttgo t-beam lora32 868Mhz boards.
They worked fine for 5 months or so, but since today
one board, stop working.
What's not happening:
- not recognized by computer (using platform.i…
-
Not all of the CC1101 modules are using the default 26 MHz crystal as e.g. the Anaren A1101R08 series which is using a 27MHz crystal.
Could you please add an option to define the crystal frequency an…
-
I'd like to see support for this protocol.
I know that this is open source, and I'm happy to contribute, but it's a little difficult figuring out how to start. Not the github stuff, or the tool ch…
-
Hi Michel, so far, ground tests are successful. In your doc you correctly say that the 868Mhz link is not going to interfere with the 2.4GHz link.
However, since I would like to stick the locator …
-
Hi. I have installed GNARL on my TTGO v1 board and it just disconnects from Loop every 5 minutes. When I try to reconnect GNARL with Loop, it just gives an error message like "Device Error. Unknown ch…